Home > Information > Content
PVC how to take care of it will be more durable?
May 13, 2017

PVC how to take care of it will be more durable?

The purpose of cleaning and maintenance

The improvement of appearance: dirt generated in daily use should be removed so that the elastic floor fully show its extraordinary appearance and natural gloss.

The protection of the floor: the elastic floor erosion from accidental chemicals, cigarette butts, traces of footprints, oil and water, the surface mechanical wear to a minimum, so that the durability of the floor itself into full play, so as to prolong the service life of the floor.

3 easy care: the surface structure of elastic floor itself closely and special treatment, pay attention to daily cleaning and maintenance, can make the floor more easily with care, prolong the service life.

Nursing notes

One should promptly remove all kinds of dirt on the ground.

The absolute prohibition of the floor is soaked in water, although some ground water partition waterproof glue is used (such as floor drain, water room etc.), but the long time of being immersed in water, will seriously affect the service life of the floor. In the process of cleaning, the sewage is sucked in by the water suction machine in time.

3 for the stream of people more, wear big place should shorten the maintenance cycle, increase the number of times of high strength surface wax wax.

The absolute prohibition of the use of hard, rough cleaning appliances (such as steel wire, 100 clean cloth, etc.), to prevent sharp objects collision elastic floor.

The place is strongly recommended against the Ottomans in high traffic public places entrance, to prevent dirt into the sand and smear scratch material.

(1) after the floor has been laid out / cleaned before use

First, the dust on the surface of the floor debris removal.

The use of floor cleaning machine with 3M red disc or similar products at low speed (with strong cleaning agent cleaning 1: 20 diluted after wiping machine inside, remove wax, floor) to protect the surface of the oil, dust and other dirt, use water suction machine to dry sewage.

3 with water wash, dry.

The requirement on the 1-2 surface layer of high strength wax.

Cleaning agent: strong general cleaning agent, high strength wax

Tools: grinding machine grinding machine water red wax mop wringer

(two) daily cleaning and maintenance

The push or dust cleaner. Drag the dust on the floor and dry the dust after airing

The wet mop. (clean the floor with the glaze, dilute the water by 1: 20, and mop the floor with a half wet mop) If necessary, you can also use the floor cleaning machine in conjunction with wash & Shine low speed cleaning.

Cleaner: floor mop, dust collector, floor cleaner, polishing agent

Tool: dust push mop

(three) regular cleaning and maintenance

The push or dust cleaner.

The floor cleaning polish by 1: 20 diluted in water, to mop the floor or with high-speed polishing machine for washing red disc.

3 on the 1-2 surface layer of high strength wax.

The requirement can be matched with white polishing pad high-speed polishing machine.

Cleaning agent: floor cleaning agent, polishing agent, high strength wax

Tools: grinding machine red, white dust suction machine grinding wax mop wringer

(four) renovation

The push or dust cleaner.

With the strong removing wax water 1: 10 diluted evenly on the ground, such as 5 - 10 minutes to clean, wax at low speed with a wiping machine with red disc. Use the suction machine to drain the sewage in time.

3 with water wash, dry, until the ground does not leave any residual detergent.

The requirement on the 1-2 surface layer of high strength wax.

Cleaning agent: floor cleaning agent, polishing agent, high strength wax

Tools: grinding machine red, white dust suction machine grinding wax mop wringer

(five) disposal of special dirt;

The local oil: oil, aqueous degreasing agent solution poured directly on the towel wipe; a large area of oil, will be the only special water-based degreasing agent in 1:10 diluted with wiping machine with red disc cleaning speed.

The black offset: spray cleaning maintenance wax to deal with polishing with white polishing pad high-speed polishing machine. For a long time of black offset printing, can be strong black offset remover directly poured on the towel, wipe processing.

3 glue or chewing gum: with professional strength in addition to adhesive poured directly on the towel wipe removal.

Cleaning agent: water-based degreasing agent, spray cleaning wax, strong black offset remover, powerful remover.


Address: No.2065,Binhong Rd,Jinhua,Zhejiang,China 321017


Contacts: Sam Woo    


Cellphone:+86 13758290649


Tel:+86 579 8911 9668


Fax:+86 579 8237 2753


Email:   sam@tkfloor.com  


Polish & Oceania Markets Contacts: Mark Antas  


Tel:+61 3 9770 6778


Products List