Home > News > Content
Industrial Flooring Low Cost And Good Durability
Oct 31, 2017

Industrial flooring for industrial and commercial sites, the need to enhance the wear resistance of concrete floor. Improve the density of the concrete surface, to reduce the dust, an increase of the city's anti-oil, the formation of a high density, easy to clean, anti-penetration of the ground. Construction with the concrete floor, construction period is short. Low cost and durability, reducing the cost of periodic coating or surface thickening.

Floor maintenance

Day maintenance

① clean the floor, use a vacuum cleaner to absorb dust.

② Use a diluted neutral detergent to scrub the floor.

Month maintenance

① clean the floor, use a vacuum cleaner to absorb dust.

② Use a diluted neutral detergent to scrub the floor.

③ remove all the dirt after drying the floor.

Years of maintenance

① clean the floor, use a vacuum cleaner to absorb dust.

② first soaked with detergent floor, until the detergent stripped of dirt after the use of sweeping machine cleaning.

③ remove all the dirt after drying the floor.

④ dried wax on the floor.

Wax matters

① U.V surface treatment of the composite membrane floor in the early use of no wax. In order to maintain the slight scratches after use, to maintain the ground luster and extend the service life, it is recommended in the year or half year (depending on the use of fatigue) for wax maintenance.

② wax before the dirt on the floor must be fully cleaned; wax to be divided into two to three times to complete, every time must be thin wax water, the first time after drying and then on the second time, at least one interval Hours or more. Wax layer is not completely dry before banned passage.

③ choose wax water varieties, please consider the environment in which heat, water and other factors. Year waxing maintenance recommended by the professional ground cleaning company to complete.

Methods of removing common dirt

① dust, sand and other dirt should be promptly removed, so as not to cause pollution and damage to the ground. Building entrances and exits and toilets should be prepared to remove dust and water to protect the door as much as possible to avoid external sources of pollution.

② on the grease and other more serious local dirt, use neutral detergent (detergent) soaked mop to wipe; if the tape mucosal traces can be erased with rubber; black rubber caused by heavy traces of toothpaste should be removed The

③ When the paint, drugs and other chemical substances accidentally drops to the surface should be wiped in time to avoid the use of diluent cleaning caused by the spread of pollution, it is recommended to use alcohol to scrub.

④ on the scratch of the dirt, the application of neutral detergent with brush cleaning.

Use the process of attention

① within 5 hours after the installation of the floor space, it is strictly forbidden to drag heavy objects on the floor or have mechanical contacts.

② Do not have sharp objects directly contact with the floor, so as not to cause scratches on the floor.

③ the use of the process, is strictly prohibited in the floor drag heavy objects. Carts or mechanical vehicles should always check the operation of the tire to ensure that the tire rolling, reduce the damage to the floor.


Products List