1, first of all need to accurately the total area of the computer room construction be anti-static floor (or blocks) and various accessories (standard support ratio of 1 to 3.5, the number of standard beam ratio of 1:5.2), and no allowance to avoid wastage or shortage.
2, fully understand the manufacturers of anti-static flooring varieties and quality, as well as a variety of technical performance indicators.
The technical performance of anti-static floor mainly refers to its mechanical and electrical performance. The mechanical properties mainly consider the load-carrying capacity and wear resistance.
3. The load of the anti-static floor shall be determined on the basis of the weight of the heaviest equipment in all the equipment in the room, thus preventing the permanent deformation or damage of the floor due to the excessive weight of some equipment.
4, anti-static floor by the impact of environmental conditions, small changes. That is not because of the external environment temperature is too high or too low has obvious expansion, is also in the room temperature is high, anti-static floor extension expansion, unable to remove and replace the anti static floor contraction; when the temperature is low, loose feeling. The anti-static floor shall be affected by the environment. The shrinkage shall be less than 0.5mm, and the flexibility of the panel shall be less than 0.25mm.
5, anti-static floor surface should be no reflection, no slip, corrosion, dust, dust, easy to clean.
Address: No.2065,Binhong Rd,Jinhua,Zhejiang,China 321017
Contacts: Sam Woo
Tel:+86 579 8911 9668
Fax:+86 579 8237 2753